This is a more traditional benchtop profile that looks fabulous in classical kitchens. Its gently curving form is wonderful to accent an island bench, especially when contrasted with a simple square edge on the surrounding benchtops.
These Z Countertop Forms are designed to be attached to the cement board, which is screwed onto the top of the cabinets. The Z Countertop forms are simply snapped off when the concrete is cured, leaving behind the decorative edge benchtop surface.
Creates a 57mm height edge to the cast-in-place concrete benchtop.
- Easy to use
- Cut to a custom length
- Cast-in-place concrete forms
- Clean cuts allow edges to align tightly
- No wooden framing required
- No heavy lifting
Includes eight (8)- 2.4m pieces (19.2 linear meters) and six (6) - 2.4m back wall pieces (14.4m linear meters).
Ogee Edge Form
To use - place 2x 7.5mm cement boards on top of the cabinets carcass. The cement boards should be cut flush to the edge of the cabinets and held in place using silicone caulking between each layer of cement board. The forms will then be screwed into the cement board with 12mm x 10g Panhead screws. After the concrete is poured, the forms are snapped off along the designated 'breakpoint' to reveal a beautiful clean edge.