MACt SCC White Premix Cement (20Kg)

MACt GFRC Premix Cement – SCC White is an economical casting mix for GFRC production, construction casting and general duty. MACt SCC  White Premix Cement is manufactured by MACt at their Queensland Manufacturing Facility. MACt SCC White Premix Cement has been designed to be used in any application where High-Performance Concrete is needed.

RECOMMENDED USES

MACt GFRC Premix Cement – SCC White is used for custom manufacturing GFRC furniture, architectural panels, three-dimensional art, street furniture and benchtops, bathtubs and sinks, where normal concrete won’t meet the performance requirements.

 

The formulation is supplied ready mixed requiring the addition of accurately measured potable water, Alkali Resistant Fibre, and admixtures as required to produce a high strength, dense and flexible concrete.

 

FEATURES & BENEFITS

MACt GFRC Premix Cement – SCC White  is a cost-effective, time-saving general GFRC concrete with the following benefits:

 

  • MACt SCC  White Premix Cement contains no crystalline Silica- SILICA FREE
  • Enhanced early strength with high ultimate strength and low permeability ensure the durability of the hardened premix
  • Can be dry-packed, rammed, trowelled, poured or pumped.
  • Pre-packaged material overcomes potential on-site mixing variations
  • Develops high early strength.
  • No metallic iron content to cause staining
  • Admixturisable for customised results.

 

APPLICATION

MACt GFRC Premix Cement – SCC White is a general-purpose Pre blended High-Performance Concrete mix and is supplied ready to use in 20kg sacks.

 

  • Add all the required water to a mixing vessel, add half of the powder and mechanically mix for three minutes. Add the second half of the powder while mixing and continue to mix for a further three minutes until smooth with no lumps.
  • The storage, handling and placement of MACt GFRC Premix Cement – SCC White must be in strict accordance with the manufacturer’s instructions.
  • In hot weather for extra work time replace up to 50% water with ice (by weight) or use MACt Retarder. Acclimatise all ingredients in a cool place for 24 hours before use.
  • In Cold Weather, warm water can be useful to reduce setting times. Acclimatise all ingredients in a cool place for 24 hours before use.
  • MACT approved release agents must be used in conjunction with MACt GFRC Premix Cement – SCC White and as per manufacturers instructions.
  • Pour or pump mixed MACt FLOW into prepared moulds and vibrate accordingly.
  • Curing must be done in a high humidity environment or by covering moulds with wet rags and plastic sheets.
  • Ambient temperatures will affect MACt GFRC Premix Cement – SCC White as it would any other cement-based mixture. 
  • Admixturisable for customised results.

 

Coverage

  • CMB: 0.015 m3
  • 20mm: 0.50m2 
  • 30mm: 0.44 m2
  • 50mm: 0.24 m2

MACt SCC White Premix Cement (20Kg)

SKU: 9E502
$78.00Price
  • Contains cement and silica, avoid inhalation of dust. Wear gloves, safety goggles, and OSHA approved dust respirator during mixing and placement. Refer to product M.S.D.S. (Material Safety Data Sheet) for additional safety information. Do not take internally. Avoid prolonged contact with skin.

    KEEP OUT OF REACH OF CHILDREN